- Lint Roller
- Craft Foam
- Baker's twine
- Skewer Stick
- Ink Pad
- Card / Wrapping Paper
Step 1: Cut the craft foam in 8 pieces approximately 1 x 2.5 inches each. Cut tree shapes out of them. Take the skewer stick and make some tiny holes in the trees. Cut a piece of baker’s twine.
Step 2: Add the foam to the roller: Position the trees so that their stumps point to the handle. Wrap the twine around and through the trees so that it looks like a hillside or a walk.
Step 3: Press the roller onto an ink pad and roll until it is completely covered with green ink.
Step 4: Roll it onto your paper. Let the ink dry.